TEOSYAL PURESENSE REDENSITY® 2 is a viscoelastic and biodegradable hyaluronic acid-based gel that is made by Teoxane Laboratories to be used in treating under-eye aesthetic imperfections. This medical device is made of both non-crosslinked and cross-linked hyaluronic acid and has a rheological profile that is adapted to suit the fragile skin in the tear trough regions, known as under-eye circles and hollow eye-circles.
The ingredients in TEOSYAL PURESENSE REDENSITY® 2 helps to regenerate and restructure skin cells, while it protects the cells from oxidation. This improves the quality of the skin and provides a natural and long-lasting correction of tired looking eyes.
Concentration
- Cross-linked & non-Cross-linked HA concentration 15mg/ml
- Lidocaine HCl 0.3%
- 8 Amino acids – Arginine, Glycine, Isoleucine, Leucine, Lysine, Proline, Threonine and Valine
- 3 Antioxidants – Alphalipoic Acid, Glutathion and N-acetyl-L-cysteine
- 2 Minerals – Copper and Zinc
- Vitamin B6
Indications:
- Light consistency
- Viscous with optimized cohesivity
- Dermo stimulating
- Anesthetizing
Whats In the Pack:
- 2 x 1 ml Syringes
- 2 x 30G ½ Needles
What is Teosyal Puresense Redensity 2 used for?
TEOSYAL PURESENSE REDENSITY® 2 is specifically designed to treat significant aesthetic issues in the tear trough region, such as under-eye circles, a palpebromalar groove, and minimal palpebral or malar bags. Once injected, the tear trough region becomes free from any unattractive fine lines and circles. Any loss of volume in the under-eye area can also be seamlessly restored using this filler gel. The tear trough area is extremely fragile, as the skin is very thin. Due to its fragility, the region reveals signs of fatigue and aging, such as eye circles, eye bags, and hollowness. These aesthetic imperfections occur as the usual cellular turnover (e.g. growth and repair) rate dwindles due to intrinsic aging. In some cases, patients also experience unintentional loss of facial fat pads surrounding the periorbital region, causing the underlying muscles and network of blood vessels to appear through the skin to a significant degree. Extrinsic aging factors, such as smoking, an unhealthy diet, improper skincare routine, lack of sun protection, and pollution all cause the skin on the tear trough region to worsen. If this area is left untreated, patients can end up looking exhausted and older than their real age
How to inject Teosyal Puresense Redensity 2?
This medical device can only be used by licensed and experienced medical practitioners on patients whose medical information has been extensively assessed. Not only that, the severity of a patient’s aesthetic conditions must be reviewed first to determine the degree of adequate correction required. In addition, spend some time during the pre-procedural session to explain the possible side effects and the appropriate aftercare methods to follow to your patient before you obtain their consent to be treated with Teosyal® PureSense Redensity II. Once their consent has been obtained, you can then commence the procedure by cleaning and sanitizing the proposed treatment areas.
How long does the effect last?
Though it has a relatively low degree of cross-linking, Teosyal Puresense Redensity 2 can still deliver aesthetic improvements for up to nine to 12 months. However, the exact residence time is influenced by patient physiology (age, skin condition, health status, lifestyle habits, etc.), the volume of filler injected, and the type of injection technique employed. This filler is completely biodegradable and disintegrates into the surrounding tissues, leaving behind no traces of a soft tissue implant. Your patients can obtain more filler gel injections into the under-eye region once the effects from the initial treatment session diminish.
Which are the indications of Teosyal Puresense Redensity 2?
The following are the indications of Teosyal Puresense Redensity 2: -Light consistency -Viscous with optimized cohesivity -Dermo stimulating -Anesthetizing
Which is the proposed treatment method for Teosyal Puresense Redensity 2?
Assemble the medical device by attaching and securing the needle provided. Next, administer the filler gel slowly via deep supra-periosteal or sub-orbicular injections. You may use injection techniques like a multi-bolus technique, which should be done with a needle, or a retrograde technique, which should be done with a cannula, for optimal results. For maximum safety and long-term improvements, you should only inject less than 0.5ml of this filler in each eye circle. Doing so will definitely reduce the risk of patients developing post-injection swelling. It is imperative that you under-correct the affected area(s) during the initial session and that you follow up this initial session with a touch-up session a month later if it is absolutely necessary. Do not reuse any leftover filler gel; discard it together with used medical supplies in biological waste bins.
Reviews
There are no reviews yet.